- With the glasses resting on a flat surface (as shown in the image), turn on the Colibri. The indicator light flashes in red and green.
- Open the Bluetooth settings of your operating system, activate the search, and find the Colibri in the list.
- On Windows: Start -> Settings -> PC Settings -> Bluetooth and other devices.
- On iOS or Android: Open Bluetooth settings -> Find and pair with Colibri.
Pairing will be completed when the Colibri light stops flashing and stays lit in green.
IMPORTANT: BEFORE PAIRING WITH IPHONE OR IPAD, ENABLE THE ASSISTIVETOUCH FEATURE
Otherwise, you won’t see the mouse cursor on the screen. On your iPhone or iPad, go to Settings -> Accessibility -> Touch -> AssistiveTouch
Troubleshooting
My Colibri does not appear in the device list
Make sure your Colibri is disconnected from other devices and available for pairing. This happens when the Colibri’s indicator light is alternating between green and red. If the Colibri remains completely still for more than a minute, it will sleep and the indicator light will turn off. If this happens, simply shake the Colibri to return it to pairing mode.
If the light is steady green without flashing, your Colibri is already connected to another device. Locate that device and unpair or turn off its Bluetooth.
If the Colibri is flashing green and red but still doesn’t appear in the Bluetooth search list, check if your device is compatible with Bluetooth 4.0 or higher.
Can I connect with more than one device at the same time?
No, Colibri can only be connected to one device at a time. To connect Colibri to another device, it is necessary to first disconnect it from the current device and pair it with the new device.
The Bluetooth connection is unstable and disconnects on its own
- Make sure the device you’re trying to connect to is compatible with Bluetooth 4.0 or higher, which is the version of Bluetooth used by Colibri.
- Move the Colibri and the device closer together to ensure a stronger Bluetooth signal.
- Check if there are any other devices nearby that could be interfering with the Bluetooth signal. Turn off any other Bluetooth devices or move them farther away.
- Try resetting the Bluetooth connection by turning off Bluetooth on both devices and forgetting Colibri on the bluetooth menu, then turning it back on and attempting to reconnect.
- Restart both the Colibri and the device you’re trying to connect to.
If the problem persists, contact customer support for further assistance.
